Dinneri tower / Llugwych castle models

Discuss Daggerfall Unity and Daggerfall Tools for Unity.
Post Reply
User avatar
King of Worms
Posts: 4752
Joined: Mon Oct 17, 2016 11:18 pm
Location: Scourg Barrow (CZ)
Contact:

Dinneri tower / Llugwych castle models

Post by King of Worms »

According to UESP wiki "Due to a bug, the Llugwych castle location re-uses the exterior model of Direnni Tower instead of the correct unique model"

And indeed, in DU the models of those two locations are currently the same.

My question is, will the correct model for Castle Llugwych be present in a DU at some stage? I ask also because of my retexture project... should I do a retexture of this currently unused model? And ofc, it would be nice to have the unused model ingame, for the sake of diversity. This thread is also to raise awareness of this.

PS: Any way to get into the Mantellan Crux fast, without completing the main quest? I need to get there to make a retexture...

Thank you!

User avatar
Interkarma
Posts: 7236
Joined: Sun Mar 22, 2015 1:51 am

Re: Dinneri tower / Llugwych castle models

Post by Interkarma »

This bad data is in the end user's copy of the game. If they're using the DaggerfallSetup version, I believe this is patched by one of the options. If I ever get permission to create a standalone build, I will ensure the data distributed is patched. For now, it's up to users to patch their copy of game because that's where the layout error is coming from.

You can find a quick way into the Crux by going to the ship and running over to the exterior entrance. You can just make out a large stone sticking above the water on the horizon from the deck of your ship. Run over to it and you can click right in. Otherwise I can help with a save. :)

User avatar
King of Worms
Posts: 4752
Joined: Mon Oct 17, 2016 11:18 pm
Location: Scourg Barrow (CZ)
Contact:

Re: Dinneri tower / Llugwych castle models

Post by King of Worms »

Got it Interkarma, thanks a lot!

User avatar
Deepfighter
Posts: 138
Joined: Sun Mar 22, 2015 10:24 am
Location: Iliac-Bay
Contact:

Re: Dinneri tower / Llugwych castle models

Post by Deepfighter »

For anyone looking for the mentioned fix - the link to the standalone patch by DelphiSnake can be found here.
Head of the German Daggerfall translation - www.daggerfalldeutsch.de
and German translator for The Elder Scrolls V: Skyrim and Lore-Expert for The Elder Scrolls: Online

User avatar
King of Worms
Posts: 4752
Joined: Mon Oct 17, 2016 11:18 pm
Location: Scourg Barrow (CZ)
Contact:

Re: Dinneri tower / Llugwych castle models

Post by King of Worms »

Just a note - that standalone fix needs fallhack to be installed tho. So the easiest way for me to do it was to use daggerfall setup and just check that fix compilation by andy ;)

Here are the exterior results, it was just another generic castle before...
Spoiler!
Castle llugwych 1.jpg
Castle llugwych 1.jpg (599.25 KiB) Viewed 1798 times
castle llugwych 2.jpg
castle llugwych 2.jpg (508.06 KiB) Viewed 1798 times
castle llugwych 3.jpg
castle llugwych 3.jpg (567.56 KiB) Viewed 1798 times

User avatar
King of Worms
Posts: 4752
Joined: Mon Oct 17, 2016 11:18 pm
Location: Scourg Barrow (CZ)
Contact:

Re: Dinneri tower / Llugwych castle models

Post by King of Worms »

And one interior shot... again, corrected the position of the columns so it makes more sense ;)
Spoiler!
llugwych int.jpg
llugwych int.jpg (502.37 KiB) Viewed 1788 times

Post Reply