[MOD] Pure Vanilla Extract
- King of Worms
- Posts: 4755
- Joined: Mon Oct 17, 2016 11:18 pm
- Location: Scourg Barrow (CZ)
- Contact:
Re: [MOD] Pure Vanilla Extract
Sure, I will work on it some more, and when you want those, send me a PM or a reply and I will send u a actual version.
No emmisions yet, too many things to work on now and I dont want to spread any further. And no wereboar adjustment yet. So if you feel like it, than by all means
Damn, it can be pain to get it working, as u maybe saw in my posts in AI upscalling where we tryed to make the program working.
But I somehow did that, yet in limited fashion.
Yesterday I downloaded some new models and will experiment with them.
Good luck!!
No emmisions yet, too many things to work on now and I dont want to spread any further. And no wereboar adjustment yet. So if you feel like it, than by all means
Damn, it can be pain to get it working, as u maybe saw in my posts in AI upscalling where we tryed to make the program working.
But I somehow did that, yet in limited fashion.
Yesterday I downloaded some new models and will experiment with them.
Good luck!!
DREAM Nexus https://www.nexusmods.com/users/73250038?tab=user+files
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
- King of Worms
- Posts: 4755
- Joined: Mon Oct 17, 2016 11:18 pm
- Location: Scourg Barrow (CZ)
- Contact:
Re: [MOD] Pure Vanilla Extract
One more question about the Topaz AI sharpening, did you apply the mask before or after sharpening?
I think you must have applyed it after? Because if I use stabilize, remove blur to right, supress noise to left (similar to you) I get some outlines around the mobs.
I want to add more sharpened frames to mobs which need it.
Its not some huge number, I noticed this:
take a ork as example.
267_15 is front facing, and is corectly sharpened BUT
267_16 is ALSO front facing, and is NOT sharpened. And u see this frame a lot.
This goes thru many archives. But the overall number of frames which need to be adjusted is not big, thanks god
Plus there are few mobs, where sharpened and un-sharpened frames are quite different. Its especially evident with a skeleton.
There I would add the 45 degrees frames as well.
I can do that, but I get that outline :X
Will wait for reply before proceeding
Heres a comparison of your frame and mine, notice the dark outline
I think you must have applyed it after? Because if I use stabilize, remove blur to right, supress noise to left (similar to you) I get some outlines around the mobs.
I want to add more sharpened frames to mobs which need it.
Its not some huge number, I noticed this:
take a ork as example.
267_15 is front facing, and is corectly sharpened BUT
267_16 is ALSO front facing, and is NOT sharpened. And u see this frame a lot.
This goes thru many archives. But the overall number of frames which need to be adjusted is not big, thanks god
Plus there are few mobs, where sharpened and un-sharpened frames are quite different. Its especially evident with a skeleton.
There I would add the 45 degrees frames as well.
I can do that, but I get that outline :X
Will wait for reply before proceeding
Heres a comparison of your frame and mine, notice the dark outline
DREAM Nexus https://www.nexusmods.com/users/73250038?tab=user+files
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
- MasonFace
- Posts: 543
- Joined: Tue Nov 27, 2018 7:28 pm
- Location: Tennessee, USA
- Contact:
Re: [MOD] Pure Vanilla Extract
Yes, I applied the alpha mask after AI sharpening.One more question about the Topaz AI sharpening, did you apply the mask before or after sharpening?
I think you must have applyed it after? Because if I use stabilize, remove blur to right, supress noise to left (similar to you) I get some outlines around the mobs.
- King of Worms
- Posts: 4755
- Joined: Mon Oct 17, 2016 11:18 pm
- Location: Scourg Barrow (CZ)
- Contact:
Re: [MOD] Pure Vanilla Extract
Can you send me the masks for 8x mobs?
Or shall I send you the sharpened frames?
Thank you!
Or shall I send you the sharpened frames?
Thank you!
DREAM Nexus https://www.nexusmods.com/users/73250038?tab=user+files
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
- MasonFace
- Posts: 543
- Joined: Tue Nov 27, 2018 7:28 pm
- Location: Tennessee, USA
- Contact:
Re: [MOD] Pure Vanilla Extract
You could just use the alpha channel of the pre-sharpened version. That should get you back to the same transparency you started off with before you use AI Sharpen.
Regardless, here are Phredreeke's masks with slight modifications. I think I had to do a little work on them even after applying the masks, but I don't think it was much. I think I've got a script to do it, but I haven't gotten all set back up yet...
Also, are the fire daedra and fire golem emissions working? They didn't appear to work on mine.
Regardless, here are Phredreeke's masks with slight modifications. I think I had to do a little work on them even after applying the masks, but I don't think it was much. I think I've got a script to do it, but I haven't gotten all set back up yet...
I noticed that on the ghost and wraith emission maps, it looked like the eyes were higher than they were supposed to be... I think either the emission map or the sprite frames got resized at some point and I forgot to take that into account.No emmisions yet, too many things to work on now and I dont want to spread any further. And no wereboar adjustment yet. So if you feel like it, than by all means
Also, are the fire daedra and fire golem emissions working? They didn't appear to work on mine.
Last edited by MasonFace on Wed May 15, 2019 12:30 pm, edited 1 time in total.
- King of Worms
- Posts: 4755
- Joined: Mon Oct 17, 2016 11:18 pm
- Location: Scourg Barrow (CZ)
- Contact:
Re: [MOD] Pure Vanilla Extract
Hi, the link doesnt work.. Id like to test that, and test using the mask from original files, than compare.
I think I will make the sharpened versions in the meantime. But my PC is quite slow for that :X
Yes, the red eyes are above the white ones. It was surprising to me, that the emision images are not the same resolution as the mob images. But I was not sure how exactly these new emissions work. But now I know this is the case of this bug. It needs to be the same resolution.
And I have noticed the fire deadra emissions are not working as well...
EDIT:
one question, the werewolf and wereboar.. archives 264 and 269
Its still the same mob for me, not sure if I accidentally kept the old version of those, but I remember you said you remade both?
Do you have both versions pls? I just have 2 same versions in both archives.
Thank you!
I think I will make the sharpened versions in the meantime. But my PC is quite slow for that :X
Yes, the red eyes are above the white ones. It was surprising to me, that the emision images are not the same resolution as the mob images. But I was not sure how exactly these new emissions work. But now I know this is the case of this bug. It needs to be the same resolution.
And I have noticed the fire deadra emissions are not working as well...
EDIT:
one question, the werewolf and wereboar.. archives 264 and 269
Its still the same mob for me, not sure if I accidentally kept the old version of those, but I remember you said you remade both?
Do you have both versions pls? I just have 2 same versions in both archives.
Thank you!
Last edited by King of Worms on Wed May 15, 2019 1:04 pm, edited 3 times in total.
DREAM Nexus https://www.nexusmods.com/users/73250038?tab=user+files
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
- MasonFace
- Posts: 543
- Joined: Tue Nov 27, 2018 7:28 pm
- Location: Tennessee, USA
- Contact:
Re: [MOD] Pure Vanilla Extract
Sorry about that. The Megaupload "Copy" button doesn't seem to work for me so sometimes I end up just pasting whatever garbage is already on my clipboard thinking that I have the URL copied. Then I get in a hurry and forget to double check the link. The link should be working now.Hi, the link doesnt work.
- King of Worms
- Posts: 4755
- Joined: Mon Oct 17, 2016 11:18 pm
- Location: Scourg Barrow (CZ)
- Contact:
Re: [MOD] Pure Vanilla Extract
Working thank you!
I edited in a question about werewolf/boar in my prev post
PS: I cant get my SLADE editor working for pallete swaps :X
Yea, no pallette swaps... but what about this?
Created with vibrance settings in Photoshop, max vibrance, zero saturation, than I return the original red eyes
Mob looks killer IMO
I edited in a question about werewolf/boar in my prev post
PS: I cant get my SLADE editor working for pallete swaps :X
Yea, no pallette swaps... but what about this?
Created with vibrance settings in Photoshop, max vibrance, zero saturation, than I return the original red eyes
Mob looks killer IMO
DREAM Nexus https://www.nexusmods.com/users/73250038?tab=user+files
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
- MasonFace
- Posts: 543
- Joined: Tue Nov 27, 2018 7:28 pm
- Location: Tennessee, USA
- Contact:
Re: [MOD] Pure Vanilla Extract
Looks pretty slick!
As for the Werewolf / Wereboar MOB sprites, I could have sworn I upscaled the wereboar and included it... it gets so hard to keep track of everything when there's so many frames and so many versions. I have folders stuffed with 4x, 8x, front facing, sharpened, masked, tweaked, final, etc. scattered about, most of them with several thousand frames, and I really need to tidy it all up so it's more organized...
I'll check the archive and send what I've got when I get home this evening.
As for the Werewolf / Wereboar MOB sprites, I could have sworn I upscaled the wereboar and included it... it gets so hard to keep track of everything when there's so many frames and so many versions. I have folders stuffed with 4x, 8x, front facing, sharpened, masked, tweaked, final, etc. scattered about, most of them with several thousand frames, and I really need to tidy it all up so it's more organized...
I'll check the archive and send what I've got when I get home this evening.
- King of Worms
- Posts: 4755
- Joined: Mon Oct 17, 2016 11:18 pm
- Location: Scourg Barrow (CZ)
- Contact:
Re: [MOD] Pure Vanilla Extract
Thanks! Ive checked all the files I have from you and all of them have just one version of this mob, duplicated to these two archives.
Mate I know exactly how this is, imagine how my HDD looks with whole DREAM mod.
I keep it as tidy as possible otherwise it would not be realistic to make it even work.
But still some errors occur occasionally.
Its a miracle this thing functions so well...
Mate I know exactly how this is, imagine how my HDD looks with whole DREAM mod.
I keep it as tidy as possible otherwise it would not be realistic to make it even work.
But still some errors occur occasionally.
Its a miracle this thing functions so well...
DREAM Nexus https://www.nexusmods.com/users/73250038?tab=user+files
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz
DREAM Forums viewtopic.php?f=27&t=1168
DISCORD: king_of_worms_cz