One of the map sections that has a elevator in the middle of a big room and the lever at the top of the elevator doesn't activate it at all.
I took at picture of the elevator in the auto map view: https://i.imgur.com/EQH33MF.png
I also notice the map segment is almost always next to the wall that turns 90 degrees if you get close and move around on one side, but the other side it doesn't move at all. This could potentially trap people with no escape method. Assuming you don't use console commands of some kind to force activate either the wall or elevator.
I saw someone else post about the problem, but it didn't seem to get resolved as it was passed off as daggerfall being unforgiving rather than a bug.
Lever at top of elevator not working (0.10.7)
-
- Posts: 3
- Joined: Fri Sep 13, 2019 12:44 am
- Interkarma
- Posts: 7247
- Joined: Sun Mar 22, 2015 1:51 am
Re: Lever at top of elevator not working (0.10.7)
Hi, welcome to forums. Please attached a save if you'd like someone to have a look at the action object. These action objects are block-specific, and a screenshot alone doesn't communicate anything we can use here.
Keep in mind that Daggerfall Unity uses the same data as classic Daggerfall for all moving objects in dungeons. If there's an issue with that classic data, we will inherit the problem. This isn't necessarily a problem with DFU itself.
Keep in mind that Daggerfall Unity uses the same data as classic Daggerfall for all moving objects in dungeons. If there's an issue with that classic data, we will inherit the problem. This isn't necessarily a problem with DFU itself.
-
- Posts: 3
- Joined: Fri Sep 13, 2019 12:44 am
Re: Lever at top of elevator not working (0.10.7)
I had tried to figure out how to attach a save file to a post but I was unable to. I still don't know how I could send it over.
- Jay_H
- Posts: 4072
- Joined: Tue Aug 25, 2015 1:54 am
- Contact:
Re: Lever at top of elevator not working (0.10.7)
Below the text box where you type a reply, there's "Options" and "Attachments." Make sure the save file is a zip, and put the zip there
-
- Posts: 3
- Joined: Fri Sep 13, 2019 12:44 am
Re: Lever at top of elevator not working (0.10.7)
Alright, sorry for the delay as I was busy. I attached my save now.
- Attachments
-
- SAVE18.7z
- (214.38 KiB) Downloaded 84 times
- pango
- Posts: 3359
- Joined: Wed Jul 18, 2018 6:14 pm
- Location: France
- Contact:
Re: Lever at top of elevator not working (0.10.7)
I suspect it's the same as viewtopic.php?t=1862, but with the elevator at the bottom position
Mastodon: @pango@fosstodon.org
When a measure becomes a target, it ceases to be a good measure.
-- Charles Goodhart
When a measure becomes a target, it ceases to be a good measure.
-- Charles Goodhart